Our Online Store have the new products: RFID antenna board. Currently it can work with JC10M24R and JCOP4 card chips.
Compared with normal cards, the antenna board module has a smaller size and fixed holes, which is easy to integrate in the IOT(Internet Of Things) project.

ACR122U

JavaCard Applet Development Related Questions and Answers.
Shine
Posts: 3
Joined: Thu Feb 22, 2018 3:47 am
Points :82
Contact:

ACR122U

Post by Shine » Thu Mar 08, 2018 12:06 am

Hi, i'm beginner in smartcard development,
i'm using contactless reader ACR122U and dual interface card JCOP 31 2.4.1.
when i tried to connect the card with pyApdutool the ATR just return value 3b 00,
and when i tried to get the UID of the card, it was return error value.


could someone give me explanation about this?
and another question, did acr122u need nfclib to work under windows environtment?
Thanks for your help.
You do not have the required permissions to view the files attached to this post. Please login first.

bigWhite
Posts: 35
Joined: Tue Aug 25, 2015 8:21 am
Points :502
Contact:

Re: ACR122U

Post by bigWhite » Thu Mar 08, 2018 10:08 pm

Get the UID of the card need to have relevant permissions,
In addition, there need internal and external authentication before getting the card UID, maybe you can contact the card issuer.

Shine
Posts: 3
Joined: Thu Feb 22, 2018 3:47 am
Points :82
Contact:

Re: ACR122U

Post by Shine » Thu Mar 08, 2018 10:19 pm

thanks for your answer,
but my really question, how to make sure that the card has connected to the reader?,
because i have tried another command but the return is error value too.

bigWhite
Posts: 35
Joined: Tue Aug 25, 2015 8:21 am
Points :502
Contact:

Re: ACR122U

Post by bigWhite » Sun Mar 11, 2018 10:05 pm

Shine wrote:thanks for your answer,
but my really question, how to make sure that the card has connected to the reader?,
because i have tried another command but the return is error value too.


how to make sure that the card has connected to the reader?
If you connected failed, you will not able to send APDUs, and the pyApdutool will prompt "Not connect yet." .
Generally, the reader returns ATR information, it means the connection is successful

Shine
Posts: 3
Joined: Thu Feb 22, 2018 3:47 am
Points :82
Contact:

Re: ACR122U

Post by Shine » Mon Mar 12, 2018 10:19 am

bigWhite wrote:how to make sure that the card has connected to the reader?
If you connected failed, you will not able to send APDUs, and the pyApdutool will prompt "Not connect yet." .
Generally, the reader returns ATR information, it means the connection is successful


when i try to connect the card (JCOP31) with the reader (acr122u (a1sr-102)), the atr isnt detected. is there any configuration or command to make the reader start to polling the card? by the way, i'm using windows 10.

Post Reply Previous topicNext topic

Who is online

Users browsing this forum: No registered users and 31 guests

JavaCard OS : Disclaimer