Page 1 of 1
regarding reader connection in pyapdu tool
Posted: Tue Apr 05, 2016 2:23 pm
by shardik16
when i press connect button in pydu tool i got one error:Connect error: [b][i][quote]The smart card has been removed, so that further communication is not possible.
how can i connect virutal reader? thanks in advance
Re: regarding reader connection in pyapdu tool
Posted: Tue Apr 05, 2016 10:35 pm
by Tarantino
shardik16 wrote:when i press connect button in pydu tool i got one error:Connect error:
[i]The smart card has been removed, so that further communication is not possible.
how can i connect virutal reader? thanks in advance
To use virtual card reader, firstly you should configure the
JCIDE.
Click the menu option Tool -> IDE Option -> Run/Debug, check the V mark in the left side of [b] Enable PCSC Interface. Press
OK button.
Then click "RUN" icon
It indicates that the virtual card reader is enable when you see the following in the debug shell.
In
pyApdutool, select the virtual contact reader or contactless reader, then click "connect" button.
Re: regarding reader connection in pyapdu tool
Posted: Tue Apr 05, 2016 11:02 pm
by shyjarod
Maybe this video is what you want.
viewtopic.php?f=3&t=3
Re: regarding reader connection in pyapdu tool
Posted: Thu Apr 07, 2016 2:29 pm
by shardik16
Hello ,
Thanks for the reply. when i run the applet i got this message in debug shell
Disconnect apdu port with JCVM successfully
Can't find reader named JAVACOS Virtual Contact Reader 0. and reader named JAVACOS Virtual Contactless Reader 1. You should install the virtual reader driver first.
Connect Simulator:Default successfully.
how can i solve this?? thanks in advance
Re: regarding reader connection in pyapdu tool
Posted: Thu Apr 07, 2016 2:36 pm
by shardik16
when i tried to enable pcsc reader. i got one error message.you should install virtual reader driver first. where i find this driver??
Re: regarding reader connection in pyapdu tool
Posted: Thu Apr 07, 2016 10:04 pm
by Tarantino
shardik16 wrote:Hello ,
Thanks for the reply. when i run the applet i got this message in debug shell
Disconnect apdu port with JCVM successfully
Can't find reader named JAVACOS Virtual Contact Reader 0. and reader named JAVACOS Virtual Contactless Reader 1. You should install the virtual reader driver first.
Connect Simulator:Default successfully.
how can i solve this?? thanks in advance
It seems that you didn't install the Virtual Card Reader Driver.
If you install
JCIDE by default, you can go to the directory
C:\JavaCardKit\SDK\Tools\JCIDE\driver. Then clcik
SdtPcsc_Install.bat to install the virtual card reader.
Re: regarding reader connection in pyapdu tool
Posted: Fri Apr 08, 2016 11:34 am
by shardik16
thank you..