Our Online Store have the new products: RFID antenna board. Currently it can work with JC10M24R and JCOP4 card chips.
Compared with normal cards, the antenna board module has a smaller size and fixed holes, which is easy to integrate in the IOT(Internet Of Things) project.

How to perform GetData command using Feitian R502 reader with a DESFire EV1 card?

card reader

Moderator: horse dream

marclo
Posts: 20
Joined: Thu Nov 19, 2015 5:41 am
Points :127
Contact:

How to perform GetData command using Feitian R502 reader with a DESFire EV1 card?

Post by marclo » Wed Jan 04, 2017 11:03 pm

How do I perform the ISO7816 GetData command using the Feitian R502 reader with a DESFire EV1 card?
I send the APDU as documented by yourselves 0xFF 0xCA 0x00 0x00 0x00 but I dont get the response back that I would expect, 7 bytes + status. Instead I get status error 0x6e.
Any help you can give on this would be much appreciated.

Hooben
Posts: 53
Joined: Tue Jun 16, 2015 12:32 am
Points :414
Contact:

Re: How to perform GetData command using Feitian R502 reader with a DESFire EV1 card?

Post by Hooben » Thu Jan 05, 2017 1:45 am

Thanks for your feedback.
The issue is exist issue, our implement is according with ISO 14443 and PC/SC standard, our engineer did check only logic memory card can support this command.

Anyway, since we got some requests from other customer also, then we do modify our firmware to make it support, you can through our update tool to have 3.50 firmware and that support get UID command, any questions, contact us anytime, thanks

Update tool can found from below: https://github.com/FeitianSmartcardReader/R502/tree/master/Tools/R502.Update

marclo
Posts: 20
Joined: Thu Nov 19, 2015 5:41 am
Points :127
Contact:

Re: How to perform GetData command using Feitian R502 reader with a DESFire EV1 card?

Post by marclo » Thu Jan 05, 2017 9:56 pm

Hooben wrote:Thanks for your feedback.
The issue is exist issue, our implement is according with ISO 14443 and PC/SC standard, our engineer did check only logic memory card can support this command.

Anyway, since we got some requests from other customer also, then we do modify our firmware to make it support, you can through our update tool to have 3.50 firmware and that support get UID command, any questions, contact us anytime, thanks

Update tool can found from below: https://github.com/FeitianSmartcardReader/R502/tree/master/Tools/R502.Update


Thanks for your answer. I will have a try.
If there is still any problem, I will come back to you.

Post Reply Previous topicNext topic

Who is online

Users browsing this forum: No registered users and 20 guests

JavaCard OS : Disclaimer